Workshop Manuals Factory service & repair Fiat
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)04 · 21 Gearbox and differential
04 · Transmission

Removing - refitting

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Removing-refitting (1581 16v) › Removing - refitting
21 Gearbox and differentialRemoving - refitting · page 1 of 4

Removing - refitting

1. Fit the engine support stand 1860851000 and the adaptor 1860851001 in the appropriate mountings.

  1. Front mounting: insert the tool in the seat of the bonnet catch so that it rests on the front crossframe.
  2. Rear mounting: fit the tool level with the central reinforcement of the fire-proof bulkhead.
  3. Secure the hook of the stand to the eyelet previously positioned near the thermostat.
Diagram showing the installation of engine support stand 1860851000 and adaptor 1860851001, with callouts a, b, and c indicating front, rear, and eyelet mounting positions respectively.

2. Relieve the staking and then remove the hub nut (gearbox side and timing side).

Close-up view of the engine support stand adaptor mounted on the vehicle's structural frame.
View of a wheel hub assembly showing a long tool being used to relieve the staking on the hub nut.

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.