Workshop Manuals Factory service & repair Fiat
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)04 · 21 Gearbox and differential
04 · Transmission

Removing-refitting

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Removing-refitting (1929 D) › Removing-refitting
21 Gearbox and differentialRemoving-refitting · page 1 of 3
Diagram showing the front crossframe area with arrows indicating bolts to be undone on the air inlet duct assembly
Diagram of the engine bay showing the air inlet duct, resonator, and a detail view of a pipe connection with arrows indicating clips and the pipe to be disconnected

REMOVING-REFITTING

Place the car on ramps, disconnect the battery's negative terminal, remove the front wheels and then proceed as described below:

  1. Disconnect air inlet duct by undoing the bolts shown in the figure, securing it to the front crossframe.
  2. Remove the air inlet duct complete with resonator by undoing the clips shown in the figure, making sure to disconnect the pipe shown in the detail.
  3. Lift the protective cover from the battery's positive pole and disconnect it, then remove the battery by undoing the nut and the attachment bracket shown in the figure. Also undo the nuts securing the cables shown in the detail, leading to the positive terminal.
  4. Remove the fuse and relay box cover by undoing the bolt indicated.
Diagram showing the battery area with arrows pointing to the positive terminal cover, battery mounting bracket, and cable connections; includes a detail view of the cable terminals

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.