Removing-refitting (page 2 of 3)

1. Remove the nuts securing the fuse and relay box to the battery cage, then move the box over to one side. 2. Remove the battery cage by undoing the bolts shown in the figure; also undo the nuts securing the mounting bracket for the starter motor supply cables. 3. Disconnect the speedometer sensor connector. 4. Disconnect the clutch cable by undoing the nut (1) and locknut (2) shown in the figure. Also disconnect the earth lead (3) from the gearbox. 5. Disconnect the reaction link shown in the detail and the gear selector engagement rods from the gearbox.