Workshop Manuals Factory service & repair Fiat
01 00 Introduction and technical data02 10 Engine03 18 Clutch04 21 Gearbox and differential05 33 Braking system06 41 Steering07 44 Suspension and wheels08 50 Auxiliary units09 55 Electrical system10 70 Bodywork
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)04 · 21 Gearbox and differential
04 · Transmission

Removing-refitting (page 3 of 3)

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Removing-refitting (1929 D)
21 Gearbox and differentialRemoving-refitting · page 3 of 3
Diagram showing the reversing lights switch connector attached to the gearbox
Diagram showing fan supply connections near the wheel hub
Diagram showing the starter motor with arrows pointing to its supply cable connections
  1. Disconnect the reversing lights switch connector from the gearbox.
  2. Disconnect the fan supply connections, then remove the fan by undoing its attachment bolts.
  3. Disconnect the starter motor supply cables.
  4. Remove the starter motor by undoing the bolts shown in the figure.
  5. Remove the gearbox top attachments.
Diagram showing the gearbox top with arrows indicating the location of the top attachment bolts
Diagram showing the lower section of the gearbox area with arrows pointing to the top attachment points

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.