Removing-refitting (page 2 of 3)

Make

Fiat

Model

Bravo /Brava (182) Factory Service Manual

Year

1995–2001

Section

Removing-refitting (1998 20v)

21 Gearbox and differentialRemoving-refitting · page 2 of 3

1. Undo the bolts securing the wishbone (right and left sides) to the front cross-frame; rotate the wishbone as appropriate to release it from the crossframe.
2. Remove the nuts shown in the figure on the heat shield to permit the subsequent withdrawal of the front crossframe. If nec-essary, shim the shield to keep it raised off the bodywork and so facilitate the with-drawal of the crossframe.
3. Undo the bolts securing the front cross-frame to the body shell; first remove the rear bolts and then the side bolts with the help of an assistant, and finally withdraw the crossframe complete with anti-roll bar.
4. Drain the gearbox oil then by undoing the plug shown in the figure.

04 Transmission