Workshop Manuals Factory service & repair Fiat
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)04 · 21 Gearbox and differential
04 · Transmission

Removing-refitting

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Removing-refitting (1998 20v) › Removing-refitting
21 Gearbox and differentialRemoving-refitting · page 1 of 5
Diagram showing the location of bolts on the air intake duct assembly
Diagram showing the car battery in its compartment

REMOVING-REFITTING

Removing

Place the car on ramps, disconnect the battery's negative terminal and the front wheels, then proceed as described below:

  1. Remove the air intake duct by undoing the bolts shown in the figure.
  2. Disconnect the battery's positive terminal, then remove the battery from the engine compartment by undoing the nut securing the retaining bracket.
  3. Disconnect the pipe connecting the air cleaner to the throttle body by undoing the clips indicated, and disconnect the connections under the pipe; also remove the resonator.
  5. Remove the relay box cover.
Diagram showing the air intake duct, resonator, and connections to the throttle body
Diagram showing the relay box cover and surrounding components

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.