Removing-refitting (page 3 of 5)
- Make
- Fiat
- Model
- Bravo /Brava (182) Factory Service Manual
- Year
- 1995–2001
- Section
- Removing-refitting (1998 20v)
21 Gearbox and differentialRemoving-refitting · page 3 of 5
- Disconnect the Lamba probe connection.
- Lift the protective cover, then remove the windscreen wiper arm by undoing its attachment nut.
- Remove the right side cover from the anti-pollen filter; to facilitate removal, undo the screws of the left side cover.
- Place a suitable supporting hook at the point shown in the figure, to hook the power unit on to during removal of the gearbox.
Parts & tools for this job For 1995 Fiat Bravo
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Fiat Bravo
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.