Removing-refitting (page 2 of 5)

Make

Fiat

Model

Bravo /Brava (182) Factory Service Manual

Year

1995–2001

Section

Removing-refitting (1998 20v)

21 Gearbox and differentialRemoving-refitting · page 2 of 5

1. Remove the nuts securing the relay box to the battery cage, then move it over to one side.
2. Remove the battery cage by undoing the bolts shown in the figure; also disconnect the electrical wiring clips indicated.
3. Disconnect the hydraulic clutch actuating cylinder from the gearbox, the earth cable and reversing lights switch.
4. Disconnect the gear selector rod by removing the split pin shown in the figure. Also disconnect the speedometer sensor connection.
5. Undo the nuts securing the cables shown in the figure to the battery's positive terminals.

04 Transmission