Workshop Manuals Factory service & repair Fiat
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)04 · 21 Gearbox and differential
04 · Transmission

Removing-refitting (page 5 of 5)

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Removing-refitting (1998 20v)
21 Gearbox and differentialRemoving-refitting · page 5 of 5
Diagram showing the engine bay bottom guard with arrows indicating attachment points.
Diagram showing the first section of the exhaust pipe and its attachments near the gearbox.
Diagram showing the wheelarch trim on the gearbox side and timing gear side, with icons for removing and refitting.
  1. Remove the engine bay bottom guard.
  2. Disconnect the first section of the exhaust pipe by undoing the attachments shown in the figure.
  3. Remove the wheelarch trim on the gearbox side and timing gear side.
  4. Disconnect the tie-rod end from the vertical link (gearbox side and timing gear side) using the puller 1847038000.
  5. Undo the bolts securing the left drive shaft flange.
Top: Diagram of the tie-rod end connection. Bottom: Diagram showing the puller tool 1847038000 being used to disconnect the vertical link.
Diagram showing the bolts securing the left drive shaft flange.

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.