Workshop Manuals Factory service & repair Fiat
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)04 · 21 Gearbox and differential
04 · Transmission

Removing-refitting (page 3 of 3)

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Removing-refitting (1998 20v)
21 Gearbox and differentialRemoving-refitting · page 3 of 3
Diagram showing the intermediate shaft connection to the engine and gearbox
Diagram showing the starter motor and surrounding components on the gearbox
Diagram showing bolts securing the gearbox to the power unit and a bolt in the bellhousing
  1. Undo the bolts securing the intermediate shaft to the engine, release it from the gearbox and move it away from the working area, securing it in an appropriate manner.
  2. Remove the starter motor by undoing its bolts.
  3. Remove the bottom bolts securing the gearbox to the power unit.
  4. Undo the bolt shown in the figure from the bellhousing, to permit installation of the gearbox support tool.
  5. Place the gearbox support tool 1860873000 on a hydraulic jack, then secure it to the gearbox as shown in the figure.
Diagram showing a bolt in the bellhousing for the gearbox support tool
Diagram showing the gearbox support tool 1860873000 secured to the gearbox on a hydraulic jack

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.