Workshop Manuals Factory service & repair Fiat
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)06 · 41 Steering
06 · Steering & suspension

Power steering pump

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Power steering pump › Power steering pump
41 SteeringPower steering pump · page 1 of 2

Power steering pump

Diagram showing the power steering pump mounted in the engine bay with callout numbers 1 and 2 indicating bolts on the mounting brackets. Two small icons in the top right corner depict a wrench and a container.
  1. remove the bolts (1) and (2), then remove the pump body complete with pulley and mounting brackets;
Diagram of the power steering pump removed from the vehicle, showing the pulley and a puller tool attached to the central nut.
  1. undo the nut and remove the pulley;

Be careful with the washer during both removal and refitting of the pulley.

  1. undo the bolts indicated and remove the rear bracket; also undo the nut (1) on the front bracket;
  2. undo the remaining bolts and remove the front bracket.

NOTE To refit the power steering pump, reverse the procedure for removal.

Diagram of the power steering pump with the rear bracket removed, showing the front bracket still attached with callout number 1 pointing to a nut.
Diagram of the power steering pump with both mounting brackets removed, showing the pump body held by a puller tool.

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.