Removing-refitting

Removing-refitting

Before removing the power steering pump, drain the fluid from the reservoir.

NOTE The old fluid should not be reused. Top up the level with fresh fluid.

To remove the power steering pump, proceed as follows:

• disconnect the fluid inlet pipe from the power steering pump;

• after slackening and removing the belts in accordance with the procedure described in Sec. 10, undo the bolt and remove the pulley from the power steering pump;

• unscrew the delivery pipe connector (arrowed), then withdraw the pump with the hose.

NOTE To refit the power steering pump, reverse the procedure for removal, then refit and tension the belts as described in Sec. 10.