Removing-refitting
- Make
- Fiat
- Model
- Bravo /Brava (182) Factory Service Manual
- Year
- 1995–2001
- Section
- Power steering pump › Removing-refitting
41 SteeringRemoving-refitting
Removing-refitting
To remove the power steering pump, proceed as follows:
- empty the fluid reservoir using a syringe;
NOTE The old fluid should not be reused. Top up the level with fresh fluid.
- undo the clamps and remove the air intake pipe;
- undo the bolts indicated and remove the belt guard;
- disconnect the fluid inlet and outlet pipes from the power steering pump.
Parts & tools for this job For 1995 Fiat Bravo
- TOOLTie rod end toolSearch: tie rod end puller
- TOOLBall joint separatorSearch: ball joint separator
- FLUIDPower steering fluidSearch: Fiat power steering fluid
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.