Compressor

COMPRESSOR

Removing

1. Position the vehicle on a lift, disconnect the negative battery lead and drain the climate control system, carry out the following operations in order:

• disconnect the connector and release it from the retaining band;

2. raise the vehicle and remove the right front wheel, remove the clip and undo the bolts shown in the diagram, fixing the wheel arch liner to the bodyshell.
3. Undo the bolts shown in the diagram and remove the lower shield from the engine compartment.
4. Acting on the belt tensioning device, loosen the tension of the single engine components drive belt; release the belt from the pullies and remove it.

NOTE Avoid the belt coming into contact with oil or solvents which could affect the elasticity of the rubber with a consequent loss of grip. Also check that there are no cracks or cuts on the belt or else it will have to be replaced.