Workshop Manuals Factory service & repair Fiat
01 00 Introduction and technical data02 10 Engine03 18 Clutch04 21 Gearbox and differential05 33 Braking system06 41 Steering07 44 Suspension and wheels08 50 Auxiliary units09 55 Electrical system10 70 Bodywork
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)08 · 50 Auxiliary units
08 · General

Refitting

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Manually operated climate control (98 range) › Refitting
50 Auxiliary unitsRefitting
Diagram showing the compressor inlet duct with a bolt indicated by an arrow
  • Undo the bolt shown in the diagram and release the pipe from the compressor inlet duct;
  • seal both the end of the pipe and the compressor duct using suitable plugs;
Diagram showing the compressor supply duct with a bolt indicated by an arrow
  • undo the bolt shown and release the pipe from the compressor supply duct;
  • seal both the end of the pipe and the compressor duct using suitable plugs;
Diagram showing the compressor with multiple bolts indicated by arrows for removal
  • undo the bolts shown in the diagram and remove the compressor;

Refitting

To refit, simply reverse the order of the operations carried out for the removal.

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.