Workshop Manuals Factory service & repair Fiat
01 00 Introduction and technical data02 10 Engine03 18 Clutch04 21 Gearbox and differential05 33 Braking system06 41 Steering07 44 Suspension and wheels08 50 Auxiliary units09 55 Electrical system10 70 Bodywork
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)09 · 55 Electrical system
09 · Electrical

Device with spiral cable (clock spring)

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Air bag › Device with spiral cable (clock spring)
55 Electrical systemDevice with spiral cable (clock spring)
Exploded view of the passenger's air bag module showing the reaction box, gas generator, cushion retainer, cushion, and cushion cover.
  1. Reaction box
  2. Gas generator
  3. Cushion retainer
  4. Cushion
  5. Cushion cover

The passenger's Air Bag is enclosed in a container which is secured to a metal frame. The components and principle of operation are the same as for the driver's Air Bag.

The cushion is made of silicone-coated nylon, and when fully inflated its internal volume is about 90 litres. It is folded in a special casing installed above the glove compartment in the dashboard.

At the centre of the casing there are pre-determined fracture lines which allow the centre of the casing to break and the cushion to emerge.

Since the cover is made of plastic, under no circumstances should it be cleaned with acids, abrasives or substances which could in any way attack the surface and impair its functionality.

The gas generator is of the pyrotechnic type and is a solid aluminium cylindrical element.

DEVICE WITH SPIRAL CABLE (CLOCK SPRING)

Spiral cable (clock spring) assembly with electrical connectors and wiring harness.

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.