Side bag modules

A. Electronic control unit B. Driver's side satellite sensor C. Tester D. Air bag system failure warning light bulb E. Passenger side satellite sensor F. Driver air bag module G. Passenger air bag module H. 50-pin connector (see pin out) I. Passenger presence sensor L. Passenger side bag module M. Driver's side bag module N. Arrows indicating control unit installation direction

SIDE BAG MODULES

The side bag modules fitted to the Fiat Bravo-Brava are fitted by a bracket to the inside of the squab on the side facing the outside of the structure. This solution is an improvement on the door-mounted version because the bag is always in optimal position in relation to the occupant regardless of seat position or occupant size.

The side bag modules consist mainly of:

• a bag measuring about 12 litres in volume and made out of permeable cloth that is able to protect the outer area of the chest and abdomen;
• a metal case containing a pyrotechnic charge that, when activated by an electric signal, causes gas to emerge and inflate the bag.
• an extremely light, plastic containment cover for the bag that maintains squab size and appearance while ensuring the bag emerges easily;
• bracket securing the module to the seat structure.

Side bag module

1. Plastic cover
2. Metal case
3. Side bag module connector
4. Electrical activation lead
5. Squab structure
6. Side bag module compartment

Side bag modules are fitted in the squab trim and do not significantly alter original seat style and size. A plastic cover in the seat trim over the module opens to allow the bag to inflate.