Refitting

NOTE There are two connections on the passenger side (Side Bag and passenger presence sensor) whilst there is only one connection for the Side Bag on the driver's seat.

• Disconnect the connector (1) for the Side Bag and the connector (2) for the Passenger Presence;

• remove the seat from the vehicle.

! Do not extract the seat from its housing, using the seat drive lever shown by the arrow in the diagram, in order not to alter the alignment of the guides.

Refitting

• Position the seat in the vehicle;
• connect the electrical connectors coming from the vehicle floor;
• make sure that the centering pin on the seat guide is in the correct position;

! Check that the carpet does not interfere in the seat guide support areas.