Workshop Manuals Factory service & repair Fiat
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)09 · 55 Electrical system
09 · Electrical

REMOVING-REFITTING Fiat CODE CONTROL UNIT

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Fiat CODE › REMOVING-REFITTING Fiat CODE CONTROL UNIT
55 Electrical systemREMOVING-REFITTING Fiat CODE CONTROL UNIT
Diagram showing the location of a protective cover on the car's interior panel, with arrows indicating fasteners.

REMOVING-REFITTING Fiat CODE CONTROL UNIT

  1. Disconnect the battery’s negative terminal, then remove the protection.
  2. Undo the bolt securing the Fiat CODE control unit and push it towards the engine.
  3. Disconnect the electrical connection from the control unit.
  4. Remove the control unit from the car.
Diagram showing the Fiat CODE control unit mounted in the vehicle, with an arrow pointing to the mounting bolt and surrounding wiring harnesses.
Diagram showing the electrical connector being disconnected from the Fiat CODE control unit located under the dashboard.
Isolated line drawing of the Fiat CODE control unit showing its housing, mounting tab, and electrical connectors.

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.