Replacing transponder

REPLACING TRANSPONDER

Use the maximum caution to avoid breakage or loss of the Transponder (carry out the dismantling operations on a table).

1. Insert a small screwdriver in the key slot and use it as a lever;
2. Open the MASTER key with care, as it consists of two half casings; the Transponder is shown by the arrow;
3. Remove the Transponder from its seating in the OLD MASTER key using a small screwdriver or point;
4. Fit the Transponder from the OLD MASTER key in the seating in the NEW MASTER key, positioning it as illustrated in the figure above, taking care not to damage the electrical component;