Workshop Manuals Factory service & repair Fiat
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)09 · 55 Electrical system
09 · Electrical

Key Programming

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Fiat CODE (98 range) › Key Programming
55 Electrical systemKey Programming · page 1 of 3

Key Programming

Diagram of ignition switch in STOP position

When the CODE warning light goes out, turn the MASTER key to the OFF position and extract it.

Diagram of new key (1) being inserted into ignition switch at MAR position

Within 10 seconds:

  • insert a new key (1) in the ignition and turn it to the ON position (+15), the CODE warning light should come on for 0.7 secs.
Diagram of key (1) being turned to STOP position in ignition
  • When the CODE warning light goes out, turn the key (1) to the OFF position and extract it.

Repeat the operations, as for the key (1), for the second key and for all the keys to be programmed.

Diagram of MASTER key being inserted into ignition switch at MAR position

Within 10 seconds:

  • insert the MASTER key once again in the ignition and turn it to the ON position (+15), the CODE warning light should come on for 0.7 secs.

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.