Key Programming (page 2 of 3)

When the CODE warning light goes out, turn the MASTER key to the OFF position, leaving it in this position for between 4 to 9 secs.

Do not leave the MASTER key in the OFF position for longer than 10 secs because all the codes programmed will be cancelled.

Turn the MASTER key to the ON position (+15), the CODE warning light should come on for 0.7 secs.

When the CODE warning light goes out, turn the MASTER key to the OFF position.

Repeat the two previous operations until, when the MASTER key is turned to the ON position, the CODE warning light rather than coming on for 0.7 seconds remains on constantly.