Workshop Manuals Factory service & repair Fiat
01 00 Introduction and technical data02 10 Engine03 18 Clutch04 21 Gearbox and differential05 33 Braking system06 41 Steering07 44 Suspension and wheels08 50 Auxiliary units09 55 Electrical system10 70 Bodywork
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)09 · 55 Electrical system
09 · Electrical

Replacing rear lights cluster bulbs

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Lighting › Replacing rear lights cluster bulbs
55 Electrical systemReplacing rear lights cluster bulbs
Rear lights cluster with a hand disconnecting the electrical connector
  1. Disconnect the connection indicated and remove the rear lights cluster from the car.
Interior trim panel near the rear lights with an arrow pointing to a screw

Replacing rear lights cluster bulbs

  1. Undo the screws indicated and remove the trim.
  2. Undo the stops indicated, disconnect the connection shown and remove the bulb holder from the car.
  3. Remove the bulbs concerned.
Rear lights cluster installed in the car body showing arrows pointing to stops and the electrical connector
The removed bulb holder assembly showing multiple bulb sockets and mounting points
Car door hinge assembly with mounting points and pivot mechanisms

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.