Replacing tail light cluster

Replacing tail light cluster

1. Remove the tail light cluster as described on page 26.
2. Before fitting the tail light cluster, ensure that the frame fastening the light cluster to the body is positioned half way along the length of the gasket preload adjustment screws. Otherwise adjust the screws as shown in the figure.
3. Correctly position the tail light cluster on the body and tighten the retaining screws shown in the figure.
4. Gradually tighten the screws in the order shown, then continue to tighten to break point.

The above operation allows the gasket between the tail light cluster and body to be adjusted to the correct pressure.

NOTE Finish refitting the parts by reversing the instructions for tail light removal.