Removing-refitting bonnet lid

REMOVING-REFITTING BONNET LID

1. Raise the bonnet lid then disconnect the windscreen washer pipes.
2. Undo the bolts fixing the hinges shown by the arrows then, with the help of a second operator, remove the bonnet lid from the vehicle.

NOTE To refit simply reverse the order of the operations carried out for the removal.

ADJUSTMENTS

Adjusting bonnet lid position

3. Loosen the bolts fixing the hinges, then adjust the position of the bonnet lid.

NOTE The arrows indicate the possible movements for the adjustment.

Adjusting bonnet lid closing device

4. Working as illustrated in the diagram, adjust the vertical position of the bonnet lid; this adjustment can also be carried out by rotating the rubber mountings at the edges of the engine compartment.

NOTE The arrows indicate the possible movements for the adjustment.