Removing-refitting bonnet lid striker

REMOVING-REFITTING BONNET LID STRIKER

1. Disconnect the bonnet release, then remove the striker undoing the fixing bolt.

NOTE To refit simply reverse the order of the operations carried out for the removal.

REMOVING-REFITTING WINDSCREEN WASHER PIPES

2. Using tool 1878077000, remove the fixing buttons and remove the sound-insulation lining for the bonnet lid.
3. Remove the windscreen washer pipes, releasing them from the bonnet lid after having removed the bands and having disconnected them from the jets.

NOTE To refit simply reverse the order of the operations carried out for the removal.

REMOVING-REFITTING FRONT GRILLE

4. Raise the bonnet lid, then remove the front grille undoing the fixing nuts shown in the diagram.

NOTE To refit simply reverse the order of the operations carried out for the removal.