Workshop Manuals Factory service & repair Fiat
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)10 · 70 Bodywork
10 · Body & interior

Rear bumper

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Bumpers › Rear bumper
70 BodyworkRear bumper
Diagram showing bolts fixing the bumper to the wheel arch liner from the side view of the vehicle rear wheel area.
Close-up diagram showing a fixing nut on the wheel arch liner indicated by an arrow.

REAR BUMPER

Removing-refitting

  1. Undo the bolts fixing the bumpers to the wheel arch liner.
  2. Remove the wheel arch liner, undoing the fixing nut shown by the arrow.
  3. Undo the bolt fixing the bumpers to the rear wing.
  4. Lift up the boot lid, then undo the bolts fixing the bumpers to the rear cross member cover.
  5. Remove the bumpers after having disconnected the connections for the number plate lights.

NOTE To refit simply reverse the order of the operations carried out for the removal.

Diagram showing a hand using a tool to remove the wheel arch liner near the rear wheel.
Rear underside view of the vehicle showing the bumper mounting points and suspension components.
Close-up of hands disconnecting electrical connectors for the number plate lights located behind the bumper.

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.