Workshop Manuals Factory service & repair Fiat
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)10 · 70 Bodywork
10 · Body & interior

Rear bumper

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Bumpers › Rear bumper
70 BodyworkRear bumper
Diagram showing bolts fixing the bumper to the wheel arch liner from inside the wheel arch.
Diagram showing the rear wing and mounting area of the bumper.

REAR BUMPER

Removing-refitting

  1. Undo the bolts fixing the bumper to the wheel arch liner.
  2. Remove the wheel arch liner, undoing the fixing nuts.
  3. Undo the bolt fixing the bumper to the rear wing.
  4. Lift up the rear tailgate, then undo the bolts fixing the bumper to the rear cross member lining.
  5. Remove the bumpers after having disconnected the connections for the number plate lights.

NOTE To refit simply reverse the order of the operations carried out for the removal.

Diagram showing a hand using a tool to remove the wheel arch liner behind the rear wheel.
Diagram showing the rear bumper being lifted away from the vehicle chassis.
Diagram showing the rear bumper with disconnected electrical connectors for the number plate lights.

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.