Removing-refitting door

REMOVING-REFITTING DOOR

• Disconnect the supply connector for the door electrical devices;
• remove the flexible pin for the door check strap, using tool 1878081000;
• remove the door after having undone the fixing bolts shown;

NOTE To refit, simply reverse the order of the operations carried out for the removal, tightening the bolts fixing the hinges to the door to the recommended torque (1.5 daNm).

ADJUSTMENTS

Adjusting front door

• Loosen the nuts fixing the hinge to the door, using tool 1860890000.
• adjust the position of the door;
• when the adjustment has been carried out, tighten the nuts fixing the hinge to the door to the recommended torque (4.5 daNm).

NOTE The arrows indicate the possible movements for the adjustment.

Adjusting position of door lock striker

• Loosen the bolts fixing the striker and adjust its position;
• when the adjustment has been carried out, fully tighten the striker fixing bolts.

NOTE The arrows indicate the possible movements for the adjustment.