Removing-refitting outer door handle

REMOVING-REFITTING OUTER DOOR HANDLE

Remove the door panel lining as described on page 5.

1. Undo the bolt and the nut fixing the handle to the door.
2. Disconnect the door opening control rods releasing them from the attachment points, then remove the handle from the door.

NOTE To refit simply reverse the order of the operations carried out for the removal.

REPLACING DOOR LOCK BARREL

3. Remove the outer door handle following the instructions given above, insert the key in the lock barrel, then remove the fixing spring.
4. Remove the retaining spring, then extract the lock barrel.

NOTE When refitting suitably reverse the order of the operations carried out for the removal.