Adjustments during refitting

ADJUSTMENTS DURING REFITTING

Adjustment of opening device.

For a correct synchronism between the electrical operation and the opening/closing of the roof the parts concerned must be adjusted as follows:

1. position the rollers (1) for the pullies exactly at the start of the sliding duct (2), before the reference mark shown by the arrow;
2. refit the electric motor with reference A corresponding to the micro-switch (3);
   • lastly, refit the window.

Adjusting the window

3. If necessary, adjust the alignment of the window with the profile of the roof using the slots in the frame (4).

Adjusting the spoiler

4. At the edges of the spoiler (5) there are two openings with slots (shown by the arrows) for fixing and alignment with the vehicle profile.