Dismantling-reassembling complete roof

DISMANTLING-REASSEMBLING COMPLETE ROOF

To dismantle the sun roof, proceed as described below:

• Remove the crystal (1) from the pullies (6) through the bolts (9). Remove the rain gutter (8). Remove the sun visor panel (2) releasing it from the guides (see detail A).
• Remove the electric motor (3).
• Remove the terminals (4) (water drainage) stuck with Betaseal type polyurethane sealant.
• Undo the two end of travel bolts (5).
• Extract the pullies (6) after having moved them into theend of travel position.
• Remove the bowden cable (10).
• Remove the deflector (7).

The bolts (9) securing the glass are treated with special glue. After the bolt has completed six travels this feature is worn out. ONLY THESE SPECIAL BOLTS SHOULD BE USED.

NOTE The following components can be removed with the assembly fitted on the vehicle: crystal (1); trim (detail B); electric motor (3); sun blind panel (2).

When refitting lubricate the sliding components with MOLYHOTE PG 30 L type grease or an equivalent product.