Crossmember/rear trim MOULDING - Painting after Replacement.

Make

Fiat

Model

Doblò Factory Service Manual

Year

2000–2010

Section

Moulding and protection › Crossmember/rear trim MOULDING - Painting after Replacement.

Body fittingsCrossmember/rear trim MOULDING - Painting after Replacement.

Crossmember/rear trim MOULDING - Painting after Replacement.

Operation 7055A65 · Exterior mouldings

Removing

Place the car on a ramp.

Disconnect the battery negative terminal.

Op. 7210E10 R.R. FRONT BUMPER

Op. 5540B80 FRONT LIGHT CLUSTER WITH DIRECTION INDICATOR AND FOG LIGHT (ONE) LH OR RH - R.R. WITH INTERFERING PARTS REMOVED

1. Undo the bolts (1a) and remove the trim (1b).

Refitting

Position the trim in its seating on the lights cluster and secure it with its bolts.

Op. 5540B80 FRONT LIGHT CLUSTER WITH DIRECTION INDICATOR AND FOG LIGHT (ONE) LH OR RH - R.R. WITH INTERFERING PARTS REMOVED

Op. 7210E10 R.R. FRONT BUMPER

Connect the battery negative terminal.

Remove the vehicle from the ramp.

17 Body & interior