Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Fiat Doblò Factory Service Manual (2000-2010)17 · Body fittings
17 · Body & interior

Grille (one) on front bumper - r.r

Make
Fiat
Model
Doblò Factory Service Manual
Year
2000–2010
Section
Moulding and protection › Grille (one) on front bumper - r.r
Body fittingsGrille (one) on front bumper - r.r

GRILLE (ONE) ON FRONT BUMPER - R.R

Operation 7055B08 · Exterior protections

1.4 8v, 1.6 16v, 1.3 JTD 16V, 1.9 JTD 8V · from 12/03 · MY 2005

Removing

- Lift the bonnet

- Turn the ignition key to the OFF position.

1. Unscrew bolts (1a) securing the grille to front bumper (1b) and remove the bumper from the vehicle.

GRILLE (ONE) ON FRONT BUMPER - R.R

Refitting

- Check that the grille on the front bumper is undamaged.

- Position the grille on the front bumper in its saet and secure with bolts.

Parts & tools for this job For 2000 Fiat Doblò

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.