Operating cylinder/clutch hydraulic actuator - r.r.
- Make
- Fiat
- Model
- Doblò Factory Service Manual
- Year
- 2000–2010
- Section
- Clutch release controls › Operating cylinder/clutch hydraulic actuator - r.r.
OPERATING CYLINDER/CLUTCH HYDRAULIC ACTUATOR - R.R.
Removing
Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R.
Using syringe, drain the brake/clutch fluid from the reservoir.
1. Remove the clamp (1a) and disconnect the pipe (1b) from the operating cylinder/actuator.
2. Undo the retaining bolts.
3. Remove the operating cylinder from the engine compartment.
Refitting
Fit the operating cylinder and secure it with its bolts.
| Fastening | Component | Ø | Value (daNm) | |
|---|---|---|---|---|
| Bolt | CLUTCH CONTROL HYDRAULIC ACTIVATOR | M8 | 1.8 |
Connect the pipe to the operating cylinder/actuator and secuire it with its clamp.
Op. 0010T67 HYDRAULIC CLUTCH SYSTEM - BLEED AIR
Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R.
Removing
Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R.
Refitting
Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R.
Op. 0010T64 BRAKE AND/OR CLUTCH FLUID CHECK LEVEL AND TOP UP AS NECESSARY
Parts & tools for this job For 2000 Fiat Doblò
- PARTClutch kitSearch: Fiat Doblò 2000 clutch kit
- TOOLClutch alignment toolSearch: clutch alignment tool
- FLUIDGear oilSearch: Fiat Doblò manual gearbox oil
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.