Oil sump bulkhead - r r

Operation 1020A46 · Crank case oil sump

Removing

1. Undo the bolts (1a) and remove the crankcase oil sump partition (1b).

Removing

1. Undo the fixing bolts (1a) and remove the vibration-proof partition (1c) fastened to the oil sump.

Removing

1. Remove the connector for the condensation oil return pipe to the sump.

2. Remove the inner connector for the condensation oil return pipe to the sump complete with O-ring.

3. Undo the bolts (3a) and remove the crankcase oil sump partition (3b).

Refitting

Place the crankcase oil sump partition back in its housing and secure it using the bolts.

Refitting

Fit the partition and tighten the fixing bolts on the oil sump.

Refitting

Fit the crankcase oil sump partition and fix it tightening the bolts to torque.

Fit the inner connector for the condensed oil return pipe to the sump complete with O-ring.

Fit the connector for the condensation oil return pipe to the sump.