Lights check not working
- Make
- Fiat
- Model
- Doblò Factory Service Manual
- Year
- 2000–2010
- Section
- Lights › Lights check not working
Fault diagnosisLights check not working
LIGHTS CHECK NOT WORKING
With the ignition on, the Body Computer does not detect faults in the operation of the side lights, stop lights or rear fog lamps, despite the fact that they are not working, and the 'Light failure' warning light does not come on
| Results of the tests | ||||
| 1 | CHECK ON BODY COMPUTER | All OK | Problems met | Operation |
|---|---|---|---|---|
| Check that the 'lights check' device inside the Body Computer is working properly | Continue to Step 2 | Light check device not working properly | Replace the Body Computer Op. 5505A32 | |
| 2 | CHECK ON BODY COMPUTER ELECTRICAL CIRCUIT | All OK | Problems met | Operation |
Verify:
| Continue to Step 3 | Connections not correct | Restore connections See E1010 SUPPLY | |
| Incorrect supply | Restore the correct supply See E1010 SUPPLY | |||
| 3 | CHECK ON CORRECT OPERATION | All OK | Problems met | Operation |
| Check that the fault is no longer present | Fault persists | Search for the fault starting from another symptom' | ||
Parts & tools for this job For 2000 Fiat Doblò
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Fiat Doblò
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.