Belt rewinding failure
- Make
- Fiat
- Model
- Doblò Factory Service Manual
- Year
- 2000–2010
- Section
- Seats › Belt rewinding failure
Fault diagnosisBelt rewinding failure
BELT REWINDING FAILURE
The seat belt does not rewind correctly and/or completely after the buckle is undone
| Results of the tests | ||||
| 0 | PRELIMINARY CHECKS | All OK | Problems met | Operation |
|---|---|---|---|---|
| Visually check that the belt does not show signs of kinks, loose threads and/or damage which prevent it from rewinding correctly | Continue to Step 1 | There are kinks in the front belt | Remove the kinks, if necessary replace belt Op. 7065A10 | |
| There are kinks in the rear belt | Remove the kinks, if necessary replace belt Op. 7065B10 | |||
| Front belt damaged | Replace the front belt Op. 7065A10 | |||
| Rear belt damaged | Replace the rear belt Op. 7065B10 | |||
| 1 | CORRECT FITTING CHECK | All OK | Problems met | Operation |
| Check that the system is correctly fitted | Continue to Step 2 | Fitting not correct | See table O31 SEAT BELTS LOCKED | |
| 2 | CHECK ON CORRECT OPERATION | All OK | Problems met | Operation |
| Check that the fault is no longer present | Fault persists | Search for the fault starting from another symptom' | ||
Parts & tools for this job For 2000 Fiat Doblò
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Fiat Doblò
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.