The seat belt does not attach to the buckle

Make: Fiat
Model: Doblò Factory Service Manual
Year: 2000–2010
Section: Seats › The seat belt does not attach to the buckle

‹ Prev Front seat lumbar adjustment not working Next › Seat belts locked

Fault diagnosisThe seat belt does not attach to the buckle

THE SEAT BELT DOES NOT ATTACH TO THE BUCKLE

The seat belt tab does not attach to the buckle.

For the rear belts, the tab for the centre place can only be attached with the corresponding centre buckle therefore if the two components do not correspond they cannot be attached

0	PRELIMINARY CHECKS	All OK	Problems met	Operation
		Results of the tests
	Check that there are no foreign bodies which do not allow the tab and the buckle to become attached	Continue to Step 1	There are foreign bodies or impediments	Remove the impediments preventing the tab and buckle from being attached
1	REEL/PRETENSIONER CHECK	All OK	Problems met	Operation
	Check that the reel and pretensioner shields are not distorted	Continue to Step 2	Front belt buckle cover distorted	Replace the front buckle Op. 7065A14
			Rear belt buckle cover distorted	Replace the rear buckle Op. 7065B14
			Centre rear belt buckle cover distorted	Replace rear central buckle Op. 7065B22
2	BUCKLE FITTING CHECK	All OK	Problems met	Operation
	Check that the buckle is intact and correctly fitted	Continue to Step 3	Fitting not correct	Refit correctly
			Front belt buckle faulty	Replace the front buckle Op. 7065A14
			Rear belt buckle faulty	Replace the rear buckle Op. 7065B14
			Centre rear belt buckle faulty	Replace rear central buckle Op. 7065B22
3	CHECK ON CORRECT OPERATION	All OK	Problems met	Operation
	Check that the fault is no longer present		Fault persists	Search for the fault starting from another symptom'

‹ Prev Front seat lumbar adjustment not working Next › Seat belts locked

Parts & tools for this job For 2000 Fiat Doblò

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.