Steering control shaft joints - tighten screws
- Make
- Fiat
- Model
- Doblò Factory Service Manual
- Year
- 2000–2010
- Section
- Steering control and linkage › Steering control shaft joints - tighten screws
‹ Prev Steering control shaft SUPPORT - R.R. for versions with Air BagNext › Steering links - r+r on vehicle - check tow-in/tow-out separately
SteeringSteering control shaft joints - tighten screws
Steering control shaft joints - tighten screws
The bolt for the element fixing the steering shaft coupling should fit in the splining on the steering box pinion.
1. Tighten the fixing bolt (1a) for the steering shaft coupling fixing element (1b) to the recommended torque.
| Fastening | Component | Ø | Value (daNm) | |
|---|---|---|---|---|
| 1a | Bolt | STEERING SHAFT JOINT FASTENERS | M8 | 3.7 |
‹ Prev Steering control shaft SUPPORT - R.R. for versions with Air BagNext › Steering links - r+r on vehicle - check tow-in/tow-out separately
Parts & tools for this job For 2000 Fiat Doblò
- TOOLTie rod end toolSearch: tie rod end puller
- TOOLBall joint separatorSearch: ball joint separator
- FLUIDPower steering fluidSearch: Fiat power steering fluid
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.