1. Removing (page 2 of 2)

CAUTION : If the turbocompressor fixing studs have been removed, refit them coated with LOCTITE FRENETANCH.

CAUTION : Adhere to the tightening torques [info icon].

CAUTION : Fit a centring pin on the exhaust manifold.

Refit the exhaust manifold (1).

CAUTION : Follow the tightening sequence.

Refit :

• The nuts (2)
• The bolts (3)
• The screws (4) of the EGR electrovalve cooler

Fit the turbocharger [info icon].

CAUTION : Check that there are no foreign bodies in the air ducts.

CAUTION : Perform the operations to be carried out following reconnection of the battery.

Reconnect the battery negative terminal.