1. Tooling
- Make
- Fiat
- Model
- Ducato Mk3 (250) Factory Service Manual
- Year
- 2006–2017
- Section
- Fuel tank: drain - refill › 1. Tooling
01 Engine - 2.2 HDi1. Tooling
ESSENTIAL : Observe the safety and cleanliness recommendations .
CAUTION : Depending on the vehicle, use the method that is most appropriate.
1. Tooling
Equipment : station for draining and filling fuel tanks (see garage equipement catalogue).
| Tool | Reference | Designation |
|---|---|---|
Figure : E5AB0FMT |
[1617-J] | Set of plugs HDI |
|
Figure : E5AB15YT |
[1604-Q] | 8 mm diameter union for low pressure take-off |
2. Draining the fuel tank via the filler neck
CAUTION : Make sure you will observe the operating instructions of the drain unit.
CAUTION : Use a clean receptacle to collect the fuel.
Parts & tools for this job For 2006 Fiat Ducato
- PARTEngine gasket setSearch: Fiat Ducato 2006 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.