3. Refitting
- Make
- Fiat
- Model
- Ducato Mk3 (250) Factory Service Manual
- Year
- 2006–2017
- Section
- Turbocharger air cooler: removing - refitting › 3. Refitting
01 Engine - 2.2 HDi3. Refitting
Figure : B1GP0JTD
Remove :
- The screws and the centring pins (3) from the turbocharger air cooler (4)
- The turbocharging air cooler (4)
3. Refitting
Refit :
- The turbocharging air cooler (4)
- The screws and the centring pins (3) from the turbocharger air cooler (4)
- The radiators assembly
Couple up :
- The radiators assembly (at "a")
- The ducts (1), (2) from the turbocharger air cooler (4); Using tool [0165-2]
N.B. : Replace all of the removed spring clips (if necessary).
Refit :
- The central front bumper ❶
- The grille (see the relevant operation)
- The vehicle to its wheels
Parts & tools for this job For 2006 Fiat Ducato
- PARTEngine gasket setSearch: Fiat Ducato 2006 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.