4. Refitting

Figure : B1JG0LTD

Unplug : The connector of the oxygen sensor (1) (at "a").
Remove the oxygen sensor (1); Using tool [4386-T].

4. Refitting

CAUTION : Adhere to the tightening torques.

Refit the oxygen sensor (1); Using tool [4386-T].
Connect : The connector of the oxygen sensor (1) (at "a").
Refit :

• The front right mud guard
• The front right wheel

CAUTION : Perform the operations that are required following a reconnection of the ancillaries battery.

Reconnect the ancillaries battery.

5. Check

Start the engine.
Check :

• The absence of exhaust gas leaks
• The operation of the oxygen sensor (1); Using the diagnostic equipment

Stop the engine.