2. Removing (page 6 of 6)

Position :

• The tool [0198-N2] on the casing
• The tool [0198-N1] on the crankshaft
• The bolt [0198-N3]

N.B. : If the screws of the tool [0198-N2] do not position themselves correctly with the tool [0198-N2]; Slightly move the crankshaft so that the tools line up.

If pegging is impossible, 2 solutions :

• Check the wear on the timing chain and chain guides
• Check that the tightening of the camshaft pulley bolts is correct

Replace any defective parts (if necessary).

Figure : B1EG0ZHD

Move aside the chain tensioner ratchet (10) (Outwards) (at "a").
Compress the timing chain tensioner (10) (Outwards).
Insert the tool [0198-J] (at "b").