2. Refitting

• The upper nut (12)
• The turbocharger (13)

Extract the turbocharger (13) via the pre-catalyst location.

2. Refitting

CAUTION : If the turbocharger mounting studs are removed, refit them coated with LOCTITE FRENETANCH.

CAUTION : Adhere to the tightening torques.

Figure : B1HG3FWD

CAUTION : Always replace the lubrication pipe (8) fitted with its seals.

Replace : The turbocharger oil supply pipe (8) (13).
Tighten the hollow bolt (15) until it is touching.
Tighten bolt (14) until it is touching.
Fit the turbocharger (13).

Refit :

• The upper nut (12)
• The turbocharger (11) lower nuts (13)
• The turbocharger oil return pipe (10) (13)
• The turbocharger oil return pipe (10) bolts (9) (13)
• The turbocharger oil supply pipe (8) (13)
• The turbocharger oil supply pipe (8) bolt (7) (13)

Reconnect the connector (at "a").