2. Dismantling (page 2 of 12)
- Make
- Fiat
- Model
- Ducato Mk3 (250) Factory Service Manual
- Year
- 2006–2017
- Section
- Engine: dismantling
03 Engine - 3.0 HDi2. Dismantling · page 2 of 12
![Diagram of the top of an engine block showing two tools [1] inserted into the camshaft bearing cap housing at position 'a', with a callout pointing to the upper timing cover (1).](/fiat/ducato-2006-2017/assets/page_429_fig01.png)
Figure : B1CM003D
Remove the plugs : On the camshaft bearing cap housing (at "a").
Fit the tools [1] (at "a").
Turn the crankshaft (clockwise) until the tools engage [1].
N.B. : The tools [1] must screw into the camshaft main bearing cap casing.
Remove the upper timing cover (1).
Parts & tools for this job For 2006 Fiat Ducato
- PARTEngine gasket setSearch: Fiat Ducato 2006 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.