4. Refitting
- Make
- Fiat
- Model
- Ducato Mk3 (250) Factory Service Manual
- Year
- 2006–2017
- Section
- Engine gearbox assembly: removing - refitting › 4. Refitting
03 Engine - 3.0 HDi4. Refitting · page 1 of 2
CAUTION : Ensure that there is no fouling between the engine-gearbox assembly and the body.
- Slowly lower the engine and gearbox assembly; Using the lifting table [3].
- Manoeuvre the engine-gearbox assembly to facilitate removal.
- Remove the power unit assembly (from below).
- Move the engine-gearbox assembly away from under the vehicle.
4. Refitting
Place the engine/gearbox assembly on the hydraulic table [3].
Parts & tools for this job For 2006 Fiat Ducato
- PARTEngine gasket setSearch: Fiat Ducato 2006 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.