Workshop Manuals Factory service & repair Fiat
01 01 Engine - 2.2 HDi02 02 Brakes - 3.0 HDi03 03 Engine - 3.0 HDi04 04 Gearbox and clutch - 3.0 HDi05 05 Steering - 3.0 HDi06 06 Suspension - 3.0 HDi07 07 Driveshafts and wheels - 3.0 HDi08 08 Air bags09 09 Audio10 10 Body front section11 11 Body rear section12 12 Body shell13 13 Brakes14 14 Wiring diagrams15 15 Wiring diagrams - supplement16 16 Doors17 17 Electrical units18 18 Fascia and panel assembly19 19 Gearbox20 20 Heating, ventilation and air conditioning21 21 Lighting22 22 Power steering23 23 Roof and headliner24 24 Seats25 25 Side structure26 26 Steering27 27 Suspension28 28 Driveshafts and wheels29 29 Wipers and washers
Fiat Ducato Mk3 (250) Factory Service Manual (2006-2017)03 · 03 Engine - 3.0 HDi
03 · Engine

Remove :

Make
Fiat
Model
Ducato Mk3 (250) Factory Service Manual
Year
2006–2017
Section
Engine gearbox assembly: removing - refitting › Remove :
03 Engine - 3.0 HDiRemove :
Diagram showing components of the engine/gearbox assembly with callout numbers 7, 8, 9, 10, 11, and 12 pointing to various parts including air ducts, bolts, a torque reaction link, and a power steering pump.

Figure : B2CM001D

Remove :

  • The air duct (7)
  • The air duct (9)
  • The bolts (10), (12)
  • The lower torque reaction link (11)
  • The power steering pump (8) (see the relevant operation)

Move aside and suspend the power steering pump (8).

Put lifting table [3] together with its supports [2b], [2a] in position under the engine.

Lift the elevating platform [3].

2.3. Alternator side

Parts & tools for this job For 2006 Fiat Ducato

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.