4. Checking the run-out

Make

Fiat

Model

Ducato Mk3 (250) Factory Service Manual

Year

2006–2017

Section

Rear brake discs: check › 4. Checking the run-out

13 Brakes4. Checking the run-out

Figure : B3FP7KPD

Use a 0/50 mm micrometer.

Max. thickness variation on one circumference = 0,025 mm .
Nominal thickness : 15,9/16,2 mm .
Min. permissible thickness (wear) : 14,2 mm .
Always replace the discs that are not as thick as the value shown.
In the case of damage or deep scratches, the surfaces of the disc may be ground.
Minimum permitted thickness after grinding : 14,55 mm.

4. Checking the run-out

13 Brakes